ThermoClick Load Chart: Horizontal Wall Girt (framing) Spacing

ThermoClick Load Chart  in Lbs. Per Sq. Ft.       40mm Thermoclick Page       Compile Material List

Girt Spacing
60″
68″
79″
93″
101″
110″
116″
40mm Poly
37 lbs.
31 lbs.
25 lbs.
20 lbs.
NA
NA
NA
Wind Speed
85 mph
90 mph
100 mph
130 mph
Higher
Wind
Loads
lbs. per sq. ft.
18 lbs.
20 lbs.
25 lbs.
43 lbs.
Please
Email
Us

Local bldg. dept. provides wind load. Ability to support load is a factor of frame strength and poly. sheet rigidity. Follow chart above and poly. sheet will support load.

Hurricane Zones: Wind load figures by SABIC, Lexan mfg, and are a general guideline.  Customers responsibility to receive an engineers stamp and bldg. dept. approval. Sundance Supply, LLC takes no responsibility for final design and install in hurricane zones, but will work closely with customer,  architect and engineer to receive bldg. dept approval.

Call 888-775-6176 tech support & project pricing.  Or Email.

40 Thermoclick Wall System- Air Infiltration & Water Penetration – With Proper Girt Spacing

Air Infiltration @ 1.57 PSF – >0.01 CFM/SQFT-MIN
Air Infiltration @ 6.24 PSF – >0.01 CFM/SQFT-MIN
Water Penetration 15 Minutes @ 15PSF- No Leakage
Water Penetration 4 Cycles at 5 Minutes @ 15PSF- No Leakage
Structural – Design Pressure +/- 32 PSF – Pass

Polycarbonate Greenhouse and Sunroom Building Supplies