Polycarbonate Positioning and Attachment----

Minimum roof slope 5 degrees, which is a 1/12 pitch.

.

Sheet must be Installed with ribs vertical with ribs vertical on walls and with the slope on roof.

Vertical and the channels can drain moisture. Horizontal and mold & mildew will gather. -

Install with ribs vertical - same direction as sheet length * Sheet size listed is width x length..-

-

Note: For high wind and load applications mid-sheet fastening (and blocking, purlin or girt positioning below) may be 3 ft. or closer.

 

Increase quantity of screws in mid sheet to every 12" for wind speeds 110-130 mph. 10" for wind speeds 131-150 mph. 8 " for wind speeds 151or greater.

 

Reload Sundance Supply Site