Most common details below. -- Screw counting for Base & Cap System-- -Use of Foam Tape

• 1).Sheet Joining
• 2).Lower Edge of Walls U-Profile can also be used to close poly edges at top & end of walls.
• 3).Eave with Purlins * -Eave Rafters & Studs * -Curved Eave * -Top of detached awning
• 4).Wall Corner
• 5).Roof Corner --- Roof Corner with overhang
• 6).Gable End to Existing Wall *
• 7).Lean-To Ridge *
• 8).Freestanding Ridge (Gable Type) -- * Shed Style
• 9) Splice Detail Shows splice, required on runs over 24 ft.
• 10) Overlap Detail Shows overlap option on runs over 24 ft. - -
• Special details below.-
• 11).Hip Roof Flashing *----- Gambrel Roof Eave *
• 12).Roof Valley Detail
• 13).Curb Skylight, Lower Edge *
• 14).Curb Skylight, Top & Side
• 15).Ridge Skylight Lower Edge - Standing Seam Roof - Poly on Same Plane * -----
• ------Ridge Skylight Lower Edge - Conventional Metal Roof Panel - Poly Shingles Over *
• 16).Polycarbonate To Existing Roofing
• 17).Arch End View
• 18).Arch Ridge Steep Slope* ---- Arch Ridge Slight Slope*
• Polycarbonate Install Information below.-
• 19).Trim Install Notes
• 20).Layout Over Frame - Purlins & Girts & - Rafters & Posts
• 21).Cutting and Installation Guidelines
• 22).Positioning & Attachment
• 23).Framing Guide and Install Manual in pdf

 

Reload Site