Cap & Trim Install Drawings show wood, same for metal tube. Trim Photos

* = Details where Silicone required. -Use Dow 999-A Silicone see Hardware.

No silicone under Cap. Silicone at joint of 2 Caps. Silicone also used to close * Ends of Cap.

 

Framing Guide & Install Manual Crucial read for successful install.

Use Base & Cap on large jobs, often buildings with horizontal roof purlins & wall girts.-

Most common details below. --Screw counting for Cap Only System- - Use of Foam Tape

• 1).Sheet Joining
• 2).Lower Edge of Walls U-Profile can be used to close poly edges at top & end of walls.
• 3).Eave Detail * --- Top of freestanding patio cover or pergola
• 4).Wall Corner
• 5).Roof Corner ---- Roof Corner with overhang
• 6).Gable End to Existing Wall *
• 7).Lean-To Ridge *
• 8).Freestanding Ridge * Shed Style
• Special details below.-
• 9).Double Slope Rafter Detail * gambrel style roof
• 10).Hip Roof and Angled Wall Detail
• 11).Roof Valley Detail
• 12).Curb Skylight, Lower Edge *
• 13).Curb Skylight, Top & Side
• 14).Polycarbonate to Existing Roofing
• Polycarbonate Install Information below.-
• 15).Trim Install Notes
• 16).Layout Over Frame for spacing of framing members.
• 17).Cutting and Installation Guidelines
• 18).Positioning & Attachment
• 19).Framing Guide and Install Manual in Adobe Acrobat

 

Reload Sundance Supply Site