- Aluminum Cap Only ( & Trim System )
Order
enough, small orders costly Terms
-
- Quick
Start: Carefully
review the "5 Links Below" to understand
basics.
- 1-Frame
Layout---•2-Install
Details---•3-Spacing-Load---•4-Rafter
Span---•5-Plans
& Costs -
-
Screws
& Hdwr- -Colors- --Ridge
Flashing- -FAQ's- -Plastic Trim Yellows- -* Use of Foam Tape
- _______________________________________________________________________
- Print Framing
Guide & Install
Manual Read Install Policy Crucial For
Install .Samples-Guides
-

-
Clear Satin Anodized U's 8mm-$10, 16mm-$11, 25mm-$12- - Cap $12- - Corner $18.
- Notes: Drill 1/16"
holes in bottom leg of "U" every 12", release moisture. Eave, Lower
Walls .
- Self-drill screws to hold
U-Profile at lower edge of roof Free With Order.
See
Instructions.
- Edges: Close
Top & Lower edges of Poly, keep out dirt &
spiders. - Min. roof pitch 5º, 1/12
pitch
- -
Top of Gable
End Wall Sheets closed
with Alum. Tape, cover with Corner Trim.
- -
Top of Lean-To
or Freestanding roof sheets closed with Tape or U-Profile..
- -
Lower
Edge of Roof & All Wall
Sheets are capped with
the U-Profile.
- -
Cap Top
Edge of Wall Sheets
(Front Wall on lean-to greenhouses) with U-Profile.
- -
Edges around Doors, Fans and Shutters may also be capped with the
U-Profile.
- -----------
- -
- Reload
Site