Use foam tape with sheets of polycarbonate over 10 feet, especially bronze poly.

 

Movement of polycarbonate, caused by expansion and contraction, can make noise. To dramatically lessen noise place 3/8" x 1/16" foam tape on all surfaces that come in contact with poly. If using wood, first coat with spar varnish or varathane to protect the wood. This provides an exceptional surface for foam tape to stick to. Foam is sticky on one side. Do not apply ArmorAll, as this solution is only for small sheets of poly and tape will never stick to it. Make sure to get Cap and other screws snug. Over tightening will impede free movement of polycarbonate, noise may develop.

 

Order 10’ sheets or longer & order form sends email about foam tape option.

Review application instructions, calculate needs and then order online.

Rolls are 108 ft. long, 648 ft. per box, $39 per box.

.

Please check your email after ordering polycarbonate.

.

 

 

----

Reload Sundance Supply Site