Polycarbonate Design & Install  -- Samples & Guide ---Poly Types & Selection -

 

Multi-Wall Polycarbonate Install Systems ---- Poly Cut & Install Basics PDF

 

#1 From descriptions below select best system for your project.

#2 Review design & install information for that system only.

#3 Once material list compiled Get a Quote. Order if you like the price.

Systems differ in way sheets join & frame layout. Choose 1 system & follow guidelines.

--------------------Corner & U-Profile Trim same for both Systems.

 

• Cap & Trim System for rafter & stud framing only. Polycarbonate sheet sets directly on frame.-

.Low cost option, for smaller structures. Cap to join sheets available in 8 ft. lengths only.

-Maximum 16 ft. roof sheets results in only 1 splice. For runs over 16 ft. use Base & Cap.

Or

• Base & Cap System for frames with roof purlins & wall girts or rafter & stud framing.

.Higher cost, best for large structures. Polycarb. sits on Base at critical sheet joining location..

.Watertight integrity on long roof runs. Runs over 8 ft., no splicing. Available in 8 & 24 ft. lengths.

.If rafter & stud framing, yield from 24 ft. lengths may be deciding factor in which system to use.

.On small rafter & stud structure, if substantial waste or any joints, Cap & Trim System best choice.

_______________________________________________________________________________

• Removable Pop-On Panels for Screen Room in low wind areas.

 

• Polycarbonate Install Components: Why to avoid? No Warranty. Poly components will yellow.

 

• Storm & Hurricane Design Protect your real estate investment.

_________________________________________________________________________

-

Corrugated Polycarbonate: Choose

--

Greca Pattern, the most common corrugated sheet. --- Or

-

Metal Building Panel, for interfacing with standard R-Panel steel siding & roofing.

 

 

 

Quote & Order ---------------------Reload Site